Care Tips

(Sunday, January 01, 2006) - To Maintain the Beauty of Your BathMaster Surface...
1. Do not rest soap bottles, spray cans, or leave wet cloths
on the surface.
2. Be sure faucets are tightly closed and drain shower pipe
after each use.
3. As with a new tub, remove excess water and
wipe after each use.

Cleaning…
1. Even though the tub does not look dirty, it should
be cleaned at least once a week with a liquid cleaner.
2. Use a good quality liquid cleaner that is not too abrasive
– as any fine finish would eventually be damaged.
3. Use non-abrasive cleaners like Scrub Bright, Soft Scrub,
Lysol Tub & Tile, or we can recommend a cleaner.

Bathmats…
1. Bathmats are the single most damaging thing you can
do to your tub!
2. We do not recommend use of a conventional suction
cup bathmat, stick-on type flowers or stripes.
3. Remove bathmat after each use. Do not hang mat
over tub. Roll up mat and put it away.

Remember, if you treat your new surface with respect, clean it regularly, and keep your taps dry, your fixture will stay like new for many years.

View all Bathmaster Press Releases

This article has been read 117 times.

Printer Friendly